How To Clean Inside Iphone Camera Lens

First, Unscrew the two screws carefully out of the housing. To do this, you use the Pentalobe screwdriver. Insert the two screws to the side and be careful that you do not lose any of the screws.

First, Unscrew the two screws carefully out of the housing. To do this, you use the Pentalobe screwdriver. Insert the two screws to the side and be careful that you do not lose any of the screws.

Next, place the suction Cup right above the home button on the Display and press it gently. Tighten slowly in the Display, and try at the same time with the thinnest side of the attach lift plate under the Display glass. Be careful and do not apply too much force. Hold to Lift only the frame and place your Hand on the Display glass.

Next, place the suction Cup right above the home button on the Display and press it gently. Tighten slowly in the Display, and try at the same time with the thinnest side of the attach lift plate under the Display glass. Be careful and do not apply too much force. Hold to Lift only the frame and place your Hand on the Display glass.

You could lift attach lift plate under the Display glass, the attach lift plate along the frame, to solve the Display glass from the frame. You take the suction Cup to help by carefully lifting the Display glass, if you drag the attach lift plate along the frame.

You could lift attach lift plate under the Display glass, the attach lift plate along the frame, to solve the Display glass from the frame. You take the suction Cup to help by carefully lifting the Display glass, if you drag the attach lift plate along the frame.

Caution: Once you have solved the Display glass from the frame, do not remove it yet. You must first loosen the two cable connections. You pull on the Display, you could destroy this connection. To remove the lower cable connection, run the blue Hebestift carefully under the silver metal plate and pry it slowly until the compound dissolves (see red circle).

Caution: Once you have solved the Display glass from the frame, do not remove it yet. You must first loosen the two cable connections. You pull on the Display, you could destroy this connection. To remove the lower cable connection, run the blue Hebestift carefully under the silver metal plate and pry it slowly until the compound dissolves (see red circle).

Now insert the metal plate to the side and remove the upper cable connection to the camera.

Now insert the metal plate to the side and remove the upper cable connection to the camera.

To remove the upper cable connection, Unscrew the four small screws from the silver metal plate. Then insert the four screws and the plate to the side.

To remove the upper cable connection, Unscrew the four small screws from the silver metal plate. Then insert the four screws and the plate to the side.

You have the metal plate removed, insert the blue Hebestift below the connectors and pry it gently upwards. Proceed careful. Once you have removed the three Links, you can remove the Display permanently and gently set it aside.

You have the metal plate removed, insert the blue Hebestift below the connectors and pry it gently upwards. Proceed careful. Once you have removed the three Links, you can remove the Display permanently and gently set it aside.

Now you can remove the elastic band from the camera, and pry out here, too, the connectors carefully.

Now you can remove the elastic band from the camera, and pry out here, too, the connectors carefully.

You have removed all the connectors, you can take the camera lens out of the housing. In order to remove the dust from the lens, use either a bellows, or DAB swab it off gently with a cotton of the lens. Do not touch the lens with a bare Finger, to avoid greasy fingerprints!

You have removed all the connectors, you can take the camera lens out of the housing. In order to remove the dust from the lens, use either a bellows, or DAB swab it off gently with a cotton of the lens. Do not touch the lens with a bare Finger, to avoid greasy fingerprints!

Before you use the camera-lens back into the housing, remove the camera glass as a precaution, also the dust. Also, use the bellows, or a cotton swab. Make sure that the swab will not leave any "lint" behind. Remove these with the bellows or a pair of tweezers. When you are finished, place the camera lens back and perform the step in reverse order.

Before you use the camera-lens back into the housing, remove the camera glass as a precaution, also the dust. Also, use the bellows, or a cotton swab. Make sure that the swab will not leave any "lint" behind. Remove these with the bellows or a pair of tweezers. When you are finished, place the camera lens back and perform the step in reverse order.

How To Clean Inside Iphone Camera Lens

Source: https://technical-tips.com/blog/hardware/iphone-repair-clean-out-dust-22435

Posted by: smithcoulp1969.blogspot.com

Share this post